🔍
Pre-Fabricated Angled Abutment compatible with Dentium 15° DØ4.5 DØ5.5 25° DØ4.5 DØ5.5 Non-hex Hex
Pre-Fabricated Angled Abutment compatible with Dentium 15° DØ4.5 DØ5.5 25° DØ4.5 DØ5.5 Non-hex Hex
Pre-Fabricated Angled Abutment compatible with Dentium 15° DØ4.5 DØ5.5 25° DØ4.5 DØ5.5 Non-hex Hex
Pre-Fabricated Angled Abutment compatible with Dentium 15° DØ4.5 DØ5.5 25° DØ4.5 DØ5.5 Non-hex Hex
Pre-Fabricated Angled Abutment compatible with Dentium 15° DØ4.5 DØ5.5 25° DØ4.5 DØ5.5 Non-hex Hex
Pre-Fabricated Angled Abutment compatible with Dentium 15° DØ4.5 DØ5.5 25° DØ4.5 DØ5.5 Non-hex Hex
Pre-Fabricated Angled Abutment compatible with Dentium 15° DØ4.5 DØ5.5 25° DØ4.5 DØ5.5 Non-hex Hex
Pre-Fabricated Angled Abutment
Pre-Fabricated Angled Abutment
Pre-Fabricated Angled Abutment
Pre-Fabricated Angled Abutment
  1. Pre-Fabricated Angled Abutment compatible with Dentium 15° DØ4.5 DØ5.5 25° DØ4.5 DØ5.5 Non-hex Hex
  2. Pre-Fabricated Angled Abutment compatible with Dentium 15° DØ4.5 DØ5.5 25° DØ4.5 DØ5.5 Non-hex Hex
  3. Pre-Fabricated Angled Abutment compatible with Dentium 15° DØ4.5 DØ5.5 25° DØ4.5 DØ5.5 Non-hex Hex
  4. Pre-Fabricated Angled Abutment compatible with Dentium 15° DØ4.5 DØ5.5 25° DØ4.5 DØ5.5 Non-hex Hex
  5. Pre-Fabricated Angled Abutment compatible with Dentium 15° DØ4.5 DØ5.5 25° DØ4.5 DØ5.5 Non-hex Hex
  6. Pre-Fabricated Angled Abutment compatible with Dentium 15° DØ4.5 DØ5.5 25° DØ4.5 DØ5.5 Non-hex Hex
  7. Pre-Fabricated Angled Abutment compatible with Dentium 15° DØ4.5 DØ5.5 25° DØ4.5 DØ5.5 Non-hex Hex
  8. Pre-Fabricated Angled Abutment
  9. Pre-Fabricated Angled Abutment
  10. Pre-Fabricated Angled Abutment
  11. Pre-Fabricated Angled Abutment

Pre-Fabricated Angled Abutment

$8.50

SKU: N/A Category: Brand:

Pre-Fabricated Angled Abutment

  • Angled Abutment [15° & 25°]

  • Tissue contour design with gold hue

  • Abutment screw included

  • Material: Ti-6Al-4V ELI

  • Compatible with all Dentium SuperLine II, SuperLine, and Implantium dental implant systems across all diameters.

NOTE: The recommended tightening torque for the Angled Abutment is 30-35 N·cm. Retighten with the same torque after 15 minutes to verify the maximum screw tension.

Reviews

There are no reviews yet.

Be the first to review “Pre-Fabricated Angled Abutment”

Your email address will not be published. Required fields are marked *

Related products